Inside and outside chamber, carrier and reservoir are fully stainless steel. Flange, fly screw, cross pin, heater cover stand are also fully stainless steel.
Hydraulically Die-pressed lid, with Pressure gauge, safety valve, extra safety valve, manual exhaust valve and vacuum breaker cum purge valve.
Stainless Steel wire mesh carrier and heater cover stand.
Moulded rubber/neoprene gasket.
Drain valve at bottom.
Industrial grade energy efficient ring type heater, custom made for Equitron Autoclaves, thus reducing power bills by 16 to 40%.
Handy-raise device for lid - safe and user friendly - on #7441 and #7451.
Automatic Purging for efficient sterilization.
Equipped with float switch and electronic circuit for Low water level alarm and cut off.
Supplied with traceable certificate for Pressure Gauge.
Documenting Options: None.
Sizes available are:
Cat#
Chamber Size
Operating Pressure
Sterilisation Temperature
7421ST
30x50cm (12x20")
15psi
121°C
7431ST
35x55cm (14x22")
15psi
121°C
7441ST
45x71cm (18x28")
15psi
121°C
7451ST
55x76cm (22x30")
15psi
121°C
Equitron Vertical AUTOCLAVE - Preset Automatic Digital (PAD)
The above STandard Autoclaves are also available with a DIGITAL microprocessor based controller.
Time and Temperature factory preset at 121°C (134°C for 30psi models) and 20 minutes (7 minutes).
Bright dual LED display simultaneously displays process and set temperatures - visible even from a distance.
Pt100 sensor, enables precise in load monitoring.
Low water level alarm and cut off.
Sensor open alarm
End of cycle buzzer and auto reset.
Miniature circuit breaker for On/Off plus safety.
Construction details are same as above.
Supplied with traceable certificate for Pressure Gauge and Temperature Indicator.
Equitron Fully Automatic Autoclaves (FA) are an industry standard, and used in almost all Pharma companies, Biotech, Research, etc. These Autoclaves are years ahead of any other brand in terms of performance, quality and features.
Microprocessor based controller with Time and Temperature programmable by user.
A backlit alphanumeric two line 32 characters LCD display, displays all information including process and set values at a glance, eliminating guesswork.
Operating and Display range up to 122°C (135°C for 30psi models) in 0.1°C resolution.
flexible Pt100 sensor, enables precise in load monitoring.
Low water level alarm and cut off.
Sensor open alarm
End of cycle buzzer and auto reset.
Miniature circuit breaker for On/Off plus safety.
Construction details are same as above.
Supplied with traceable certificate for Pressure Gauge and Temperature Indicator.
Optional Extras: Documenting options.
Sizes available are:
Cat#
Chamber Size
Operating Pressure
Sterilisation Temperature
7421FA
30x50cm (12x20")
15psi
121°C
7431FA
35x55cm (14x22")
15psi
121°C
7441FA
45x71cm (18x28")
15psi
121°C
7451FA
55x76cm (22x30")
15psi
121°C
7423FA
30x50cm (12x20")
30psi
134°C
7433FA
35x55cm (14x22")
30psi
134°C
Equitron Vertical AUTOCLAVE - SLE Series (Fully Automatic)
Equitron SLE Series Fully Automatic Autoclaves are similar to FA Autoclaves, with a number of additional features. At the heart of SLE series is a secure microprocessor controller which provides high control accuracy along with user level flexibility for sterilizing various types of loads efficiently.
Every single Autoclave chamber is hydrostatically tested to 1.5 times its operating pressure. Inspection as per set standards are carried out by qualified engineers at the raw material inward stage, mid process stage and during final tests and calibrations.
Unique single lever lock for lid with single hand opening.
Microprocessor Based Control ensures repeatability & a high accuracy.
Conformance to National & International Standards.
Internal Chamber and lid along with all wetted parts fabricated from Stainless Steel.
Single lever pronged closure system (Patent under progress) with patented Silicone Gasket (registered design No. 208774.)
External vertical panels of MS duly heat cured epoxy coated.
Easy lift and closing of the lid by assisted support.
Castors for ease of movement.
Flexible sensor enables in-situ control and monitoring of cycles.
Pressure interlock on door.
Audio & Visual alarms for sensor open and low water level.
MCB for electrical safety.
Independent over temperature safety cut out.
Documenting options available.
Sizes available are:
Cat#
Chamber Size
Operating Pressure
Sterilisation Temperature
7421FA
30x50cm (12x20")
15psi
121°C
7431FA
35x55cm (14x22")
15psi
121°C
7441FA
45x71cm (18x28")
15psi
121°C
7451FA
55x76cm (22x30")
15psi
121°C
Equitron AUTOCLAVE - Single Lever Lock - Vacuum Series
A high end Autoclave, with a Single Lever Lock for the Lid, a secure Microprocessor Controller and Vacuum. Fully Automatic operation. Complete safety features. User friendly programmable Controller with options of pre-vacuum, free-steaming and post vacuum, besides time & temperature, makes it equivalent to a high end horizontal autoclave.
The unit is controlled by a Programmable Logic Controller (PLC) with touch screen graphic display which provides for a flexible user friendly interface and accurate control.
All the critical parameters including set parameters & alarms are displayed on the touch screen. The PLC controls and monitors each and every parameter which provides higher reliability.
User customisable cycle with flexibility of setting following parameters:
Number of negative pulses
Number of positive pulses
Sterlisation temperature
Sterilisation hold time
Vacuum drying
Sizes available are:
Cat#: #7441SLV. Equitron Autoclave SLV - Vacuum. Size: 45x71cm (113 lit). With -ve, +ve & post vacuum.
Documenting Devices for Equitron Autoclaves
Documenting Options provide various methods for recording data related to the sterilisation cycle.
Simultaneous display on HMI & online printing of 4 temperature channels (including controlling sensor) with 1 F + 1 pressure channel to external DMP.
PLC
SLV
Equitron AUTOCLAVE - Table Top Automatic - Class B
It adopts European Class B standard.
With pulse pre-vacuum - essential for sterilizing all wrapped (single / double) or unwrapped items, including porous items that do not exceed the specifications of Hollow load Type A.
A pre defined program list for easy operational settings: Reproducible sterilization cycles are accomplished through the defined programs.
Electronic control module offers microprocessor controls and LED display of operating parameters, where temperature, pressure and sterilisation time are constantly displayed.
Drying cycle.
Safer and more reliable door structure. A heat-insulated door with locking feature prevents opening while the chamber is under pressure to help minimize dangers to operator.
Exhaust steam is discharged to an inbuilt water collection tank thus keeping the room steam free.
Sterilizing Temperature: 121°C or 134°C
Test: Bowie & Dick test
Safety Features: Pressure Release Valve and computerized diagnosing and alarm system
Water supply system: Reservoirs (2Ltr fresh water supply system and 1.6Ltr waste water reservoirs)
Power: 2400W / 10A
Cat#: 7471-B-22. Class B Autoclave. Size: Dia 25cm x 45cm (22L approx.) 3 Trays.
Equitron AUTOCLAVE - Portable
Stainless Steel construction. With Dressing Drum, Pressure Gauge, Safety Valve, Extra Safety Plug, Manual Exhaust Valve and Vacuum Breaker cum Purge Valve.
Sizes available are:
Cat#: 7407ST. Size: 30x23cm.
Also available: Portable Automatic Autoclaves with Preset Temperature Controller (121°C) & Timer (20 minute).
Equitron Media Preparator cum Autoclave
The EQUITRON media preparator is a boon to any laboratory. It is basically an autoclave with special features for handling of liquid media, agar, broth, or any other media. The media is poured directly into a special container in the autoclave, which also has a magnetic stirrer. The media mixes in this, the temperature rises to a user-settable sterilizing temperature, holds for the desired time, then cools rapidly to the media pouring temperature between 45°C & 65°C; and then, without opening the autoclave, the desired volume of media can be dispensed directly onto petri plates – placed in a clean bench – by an external peristaltic pump and all this, while constant stirring of the media is taking place to prevent solidification. This entire process is automatic. The user has to just feed in parameters as per his requirements.
Volume: Maximum 9 / 27 litres (water + media)
Rotation: Constant 45 RPM
Temperature: Sterilisation 95 to 125°C (Special cycles: 25 to 125°C)
Dispensing Temperature: 30 to 80°C (Special cycle: 25 to 80°C)
Temperature Accuracy: +/- 1°C in stable phase
Timer: Setting from 1 to 60 min, by programming
PLC control with Touch screen LCD display
Teflon stirring rod connected with two vertical teflon rod for efficient stirring.
Solenoid valves: 1 for water flow, 1 for decompression, 1 for outer vessel
"Easy load" peristaltic pump and 3 silicone tubing sets.
Cat#: 7415-09. Equitron Media Preparator cum Autoclave 09 Ltr, with PLC.
Cat#: 7415-27. Equitron Media Preparator cum Autoclave 27 Ltr, with PLC.
Accessories available:
Cat#: S4305-70. Peristaltic Pump.
Cat#: S1104-50. Raw Water Filter.
Cat#: S4305-10. Booster Water Pump.
Equitron
